•On the Control Panel, press the Log In/Out button and then enter the Administrator passcode [1111] and select Enter.
•Press the Machine Status button then select Tools > Connectivity and
Network Setup > Advanced > Network Setting > Network Setup > TCP/ IP Options > TCP/IP Settings.
•The allocated TCP/IP address is in the Name/Address field.
2Confirm that an IP address has been allocated and that it is an appropriate IP address for your network.
NOTE: If the IP address starts with 169.xxx.xxx.xxx, the DHCP server has not properly allocated an address or DHCP is not enabled on your network. Contact your network administrator for assistance.
Network Setup Using a Static IP Address
Before you begin, obtain the following information from your network administrator:
•IP Address
•Gateway Address
•Subnet Mask
•DNS Server Address
1Press the Log In/Out button on the Control Panel, enter the
Administrator’s passcode [1111] and select Enter.
2 Press the Machine Status button then select Tools > Connectivity and Network Setup > Advanced > Network Setting > Network Setup > TCP/IP Options.
3Select HTTP and Enable. Select Save.
4Select TCP/IP Settings.
5Select the Dynamic Addressing
button. By default, DHCP will be selected. Select Disabled to disable DHCP and select Save.
6Select Name/Address. Enter the Host Name, by selecting the Keyboard symbol. Enter the IP Address by touching each box and entering the number using the Numeric Keypad. Select Save.
7Select Subnet and Gateway. Enter the Subnet Mask and IP Gateway. Select Save.
8If you do not wish to configure DNS settings proceed to the next step. If you wish to configure DNS settings select the DNS Configuration button. Enter the Domain Name and the Preferred DNS Server address. Select Save.
English
quick use guide | 11 |
