![](/images/new-backgrounds/1105540/105540169x1.webp)
10 IPP (Internet Printing Protocol)
This chapter explains how to set up the machine to operate in an IPP (Internet Printing Protocol) environment. The following information is provided.
Information Checklist – page 85
IPP Environment – page 86
IPP Installation – page 86
Installation Procedure – page 86
Network Communication Setup – page 87
Workstation Setup – page 88
Test Print – page 88
Information Checklist
Before starting the IPP installation procedures, make sure that the following items are available or have been performed.
| Item | By |
|
| |
|
| |
An existing operational TCP/IP network is required. These procedures | Customer | |
are not designed to install a network. |
| |
|
| |
Obtain and record the following information: | Customer | |
• | IP address |
|
• | Gateway address |
|
• | Subnet mask |
|
• | Host name |
|
Refer to the glossary for additional information about the Gateway |
| |
Address and Subnet mask, if needed. |
| |
|
| |
Test the machine to make sure that it is installed fully and functioning | Customer | |
correctly. |
| |
|
| |
Print driver for the machine | Customer | |
|
|
|
If problems are encountered during the installation of the machine, refer to Problem Solving chapter for assistance.
CAUTION: Do not connect the network cable to the machine until instructed to do so.
Xerox CopyCentre/WorkCentre 118 System Administration Guide | 85 |