Xerox 701P42722_EN manual When a switch off/on message is displayed

13 Problem Solving

When a switch off/on message is displayed

Cause	Confirmation Method	Action
A fault occurred in the	–	Switch the machine off and
NetWare interface.		on.

When the required printing result is not obtained

Cause	Confirmation Method	Action
The specified print language	Check the print language of	Specify the same print
of the print job is different	the machine.	language of the print job as
from one specified in the		that of the machine.
machine.
Banner page print is specified	<Confirmation -1>	<Action -1>
for the job.	When printing under the	When defining the
	CAPTURE/NPRINT print job	CAPTURE/ NPRINT print job
	configuration, use the SHOW	configuration, specify
	option to check that the	NOBANNER.
	banner flag is not specified.
	<Confirmation -2>	<Action -2>
	When printing from	Inactivate the banner page
	PCONSOLE under the print	print in the print job
	job configuration created with	configuration with
	PRINTCON, check that the	PRINTCON.
	banner page print is
	available.
The file server and network		<PServer mode>
are in the overload state.		No action.
	–	<RPrinter mode>
		Extend the duration before
		timeout.
A fault occurred during print	Check the NetWare error	Switch the machine off and
processing.	displayed on the control	on.
	panel.

116 Xerox CopyCentre/WorkCentre 118 System Administration Guide