Digital Certificates
SSL/TLS cannot be enabled unless a digital certificate has been installed on the system, using the Add Certificate button. Installing a digital certificate can only be done by someone with administrator privileges.
The administrator selects SSL/TLS from the [Setup] Menu and clicks on the [Add Certificate] button. This invokes the Add Certificate wizard. There are two options regarding digital certificates. One option is
Another option is “Signed Certificate from a Certificate Authority”. In this case, the administrator needs to supply the fully qualified domain name, IP address, organization and country of the Certificate Authority.
If the choice is to use a Certificate Authority, all Certificate information needs to be held in a file and sent to the Certificate Authority. The Authority returns a valid certificate that must be installed on the system.
NOTE: A
Once the Digital Certificate has been installed, the Enable SSL/ TLS selection becomes available among the [Setup] options. At that time the administrator can select the mode of operation, Normal or Secure, from a
Network Protocol
|
| This section addresses Network Protocol, name service changes |
|
| and the changes that occur when security is invoked. |
|
| The table below addresses the list of Network Protocols that are |
|
| used by the Xerox FreeFlow Print Server software or Xerox client |
|
| operations. |
|
| Table |
|
|
|
| Network | Required |
| Protocol | |
|
| |
|
|
|
| Samba (SMB) | Network sharing protocol required for Hot Folders and SMB |
|
| filing (Nuvera only). |
|
|
|
| XSun | Required for functionality of Xerox FreeFlow Print Server |
|
| diagnostics software. |
|
|
|
|
|
|
Security Guide | 27 |
