Xerox 701P46740 manual Http, Ipp, Snmp, Wins, Tcp/Ip, Lpd Lp/Lpr, Ssh

Network	Required
Protocol
HTTP	Used when connecting to the server via the HTTP gateway.
	Connections can also be filtered using the IP Filter feature
	under Setup -> IP Filter.
	NOTE: When SSL is disabled (off) other web-based logins
	provided by the Xerox FreeFlow Print Server may not be
	secure. Use the HTTPs qualifier to guarantee a secure
	interaction.
Tomcat web	Required for the functionality of the Xerox FreeFlow Print
server	Server Internet Services gateway and the Xerox Remote
	Services application.
IPP	Required for job submissions from the FreeFlow® Print
	Manager and/or a Digipath (FreeFlow 2.0+) client. The IPP
	gateway can be enabled/disabled under Setup -> Gateways ->
	IPP tab. Connections can also be filtered using the IP Filter
	feature under Setup -> IP Filter.
Sun RPC	Used by many different clients, including DigiPath/FreeFlow
	and Xerox FreeFlow Print Server Remote WorkFlow (DRW),
	and network services such as NIS+. Typically used to establish
	a connection to the server, which then redirects the connection
	to another open port using OS level port management. This
	service is shutdown when Xerox FreeFlow Print Server security
	is set to high. Connections can also be filtered using the IP
	Filter feature under Setup -> Security Profiles -> <Any Profile> -
	> RPC tab
SNMP	Used for SNMP message exchange and traps. The SNMP
	gateway can be enabled/disabled under Setup -> Gateways ->
	SNMP.
WINS	Required when in an environment where connection to a WINS
	server is necessary. WINS service can be enabled/disabled
	under Setup -> Network Configuration -> WINS tab.
Socket (Raw	Required if jobs will be submitted via the socket gateway. The
TCP/IP)	socket gateway can be enabled/disabled under Setup ->
Printing	Gateways -> Socket. Connections can also be filtered using the
	IP Filter feature under Setup -> IP Filter.
LPD (LP/LPR)	Required for job submissions via the LP/LPR gateway (LP/LPR
	client, Xerox FreeFlow Print Server Print Service (Reprint),
	etc.). The port assigned to the LPD can be changed and/or the
	gateway can be enabled/disabled under Setup -> Gateways ->
	LPD.
SSH	Access the server via a secure shell (SSH, SFTP, etc.).

28 Security Guide