Xerox 721P88200 manual MICR applications

INCORPORATING XEROX VALUE-ADDED FEATURES

MICR applications

You may print documents that include MICR fonts on the DocuPrint 96, 4635, and 180 MICR IPS printers. Xerox provides the IPS MICR font kit which includes the E13B and the CMC-7 MICR fonts, MICR diagnostic forms and installation instructions. These fonts are loaded into your 300 dpi font library and used for all MICR applications printed on the DocuPrint 96, 4635, and 180 MICR IPS printers.

While other printers may also print MICR applications, they do not guarantee their printing and product quality. Xerox stands behind the performance of Xerox MICR laser printers and the Xerox benchmark MICR inks. We will assist our customer in investigating and resolving bank-reported MICR performance or reject rate problems. If we are unable to resolve the issues, we will reimburse the customer for fees they are required to pay to their bank for excessive rejects of checks printed after Xerox was notified of the problem, and where it is verified by Xerox that Xerox MICR materials or printer-related check defects are the cause of the imposition of the fees.

Use of a non-Xerox E13B and CMC-7 MICR font is not supported and will invalidate the Xerox Check Performance Guarantee. Any Xerox cost incurred in this regard may be billed to the customer.

MICR printing on the DocuPrint 96, 4635, and 180 MICR IPS printers

You can print your existing MICR applications that were originally created for an IBM 3828 MICR printer on the DocuPrint 96, 4635, and 180 MICR IPS printers. This printer accesses the Xerox AFP MICR fonts to print the MICR characters required for the document. All other font resources for MICR applications printing must be supplied at 300 dpi resolution.

5-12 DOCUPRINT IPS SOLUTIONS GUIDE