Xerox Document Centre Setup Guide for FlowPort
This document is intended for use by FlowPort System Administrators when configuring the following Xerox Document Centres to scan to a FlowPort server:
•Document Centre 240/255/265/460/470/480/490
•Document Centre 220/230/332/340/432/420/425/432/440
There are two basic things you must do on the Document Centre:
•Designating a “repository” on the document centre. This is the IP address of the FlowPort server.
•Setting up a default scan template.
The procedures in this guide are provided as examples only. Because of firmware differences, the screens you see may be different, however you may use the concepts presented here.
Xerox Document Centre Setup Guide for FlowPort 1
