Configuring a Document Centre 220/230/332/340/432/420/425/432/440 with Centreware Internet Services

Testing the FlowPort Template

To check that the Document Centre is ready for FlowPort use, perform the following test:

1

2

At the Document Centre, place a document in the scanner.

Select the FlowPort template and select Scan.

Note: If the Document Centre is properly configured, a DC confirmation sheet will be printed confirming that the scan to FlowPort was successful, otherwise an error report with some specific failure notice will be printed. If the scan to FlowPort was successful a FlowPort confirmation sheet will also print.

Xerox Document Centre Setup Guide for FlowPort 21

Page 21
Image 21
Xerox setup guide Testing the FlowPort Template