Programming the Xerox LS 3270
Xerox LS 3270
- 18 -
5.1. Setup functions supported in PCL mode
Y1 Set IBM Buffer Size
Y2 Set Default LPI
Y3 Set Default CPI
Y4 Set Default Line Spacing
Y5 Set Default Page Length (MPL)
Y6 Set Default Max. Print Position (MPP)
Y7 Set Case (Mono,Dual)
Y8 Set LU1 Language
Y10 Set Page Format
Y11 Set Default Paper Path
Y12 Set Default Paper Size
Y13 Line Overflow Condition
Y14 Enable Graphics Option (idaAFP)
Y19 Set Simplex/Duplex
Y22 Printer Driver Selection
Y25 FF Before Local Copy
Y26 FF After Local Copy
Y27 NON-SCS Print Image
Y28 NON-SCS, CR at MPP+1
Y29 NON-SCS, NL at MPP+1
Y30 NON-SCS, Valid FF Followed by data
Y31 NON-SCS, Valid FF at end of buffer
Y32 NON-SCS, FF Valid
Y33 NON-SCS, Automatic Func. at end of job
Y34 Last LF on page sent as FF
Y36 Suppress IBM control codes (parameters 0 and 1)
Y37 IBM Printer Emulation Select (parameters 0,1,2 & 4)
Y38 IBM Communication Feature (Query, EAB)
Y41 Generation of NL at EM
Y44 Suppress CR and SP
Y46 Set IRQ Timer
Y47 ESC Mode Selection
Y48 Set Permanent ESC Character
Y49 Restrict access of NVRAM settings
Y50 FF After Time Elapse
Y51 User-defined string(s) at Power-on
Y57 User-defined string before local copy
Y58 User-defined string after local copy
Y59 Bar Code Type Definition
Y60 Font Link
Y61 Setup for user-defined strings (parameters 0 - 7)
Y62 Setup for IBM defined strings
Y63 Define Logo
Y72 Reset Translate Table
Y73 Select Translate Table