Preface
Xerox LS 3270
- 2 -
Preface
September 1997
This manual applies to the Xerox LS 3270 protocol converter,
installed with firmware release S10 130.002, and to any sub-
sequent release until otherwise specified.
The Xerox LS 3270 supports Coax and Centronics inputs. The
output is Centronics.
The manual describes how the Xerox LS 3270 is connected and
operated. Read it (and the Quick Guide provided with the product)
before you start using the protocol converter, and keep the manual
in a safe place for future reference.
It is assumed that the reader has a basic knowledge and under-
standing of IBM computer systems, especially the IBM 3270 Infor-
mation Display System. It is also assumed that the reader has
adequate knowledge of the printer which is going to be connected
to the Xerox LS 3270.
The Xerox LS 3270 can be used with most ASCII printers.

Related Manuals:

"3270 Programmer's Guide", Document no. D62077.
The above manual describes how the Xerox LS 3270 is
tailored for a specific printer or application. Output drivers are
FSL or PCL which are selected via the front panel of the box
(See Chapter 1. for more details).
"IBM 3268 Printer Models 2 and 2C Description"
IBM Order No. GA27-3268
Contains information on the IBM 3268 printer which Xerox LS 3270
emulates.