Introduction
Xerox LS 3270
- 7 -
1.5 Paper Size Default (US/EU)
When you receive the Xerox LS 3270, the box is ready to connect
to the system and to the printer. From the factory, the Xerox LS
3270 interface is set up for either US (Letter) or European (A4)
paper size (depending on what you specified when ordering the
Xerox LS 3270). If, however, you should need to change the
default, you may do this by using the FSL function Y8 (see
Appendix A for details).
1.6. Operating Environment
The Xerox LS 3270 protocol converter can be installed in the
following environment:
• Works in the complete temperature range specified for
the connected printer if not exceeding 45° Centigrade
• Relative humidity between 8% to 80%, non-condensing
• External power supply: 5V (250 mAmps).