Error Messages

Xerox LS 3270

THE USER ADDRESS STRING IS TOO LONG

TERMINATOR NOT ACCEPTED

ESC Z IS WRONG

Validation value in FLASH PROM is wrong

YOU CANNOT LOCK THE FLASH PROM

BEFORE YOU HAVE PROGRAMMED IT

7.2. Non-Recoverable Hardware Errors

The following recovery attempt can be made:

Turn power OFF for 10 seconds and then ON again. If the problem persists, seek technical assistance.

The non-recoverabel error messages consist of this message: HARDWARE MALFUNCTION. Call for service.

followed by one of these diagnostic messages: COAX IF ram error

Wrong data in selftest Wrong word in selftest Nothing received in selftest 8085 ram error

Rom check sum error

Response missing from COAX IF

Invalid test response from COAX IF

- 29 -

Page 29
Image 29
Xerox ls 32270 instruction manual Non-Recoverable Hardware Errors