Dell DL2100 E1229, Reseat CPU, E122A, E122C CPU Power, Fault. Power, E122D Memory, Regulator #

Table 1-1. LCD Status Messages (continued)

Code	Text	Cause	Corrective Actions
E1229	CPU # VCORE	Specified processor	Reseat the processor(s).
	Regulator	VCORE voltage regulator	See "Troubleshooting the
	failure.	has failed.	Processor(s)."
	Reseat CPU.		If the problem persists,
			see "Getting Help."
E122A	CPU # VTT	Specified processor VTT	Reseat the processor(s).
	Regulator	voltage regulator has failed. See "Troubleshooting the
	failure.		Processor(s)."
	Reseat CPU.		If the problem persists,

see "Getting Help."

E122C CPU Power	A power fault was detected
Fault. Power	when powering up the
cycle AC.	processor(s).

Remove AC power to the system for 10 seconds and restart the system.

If the problem persists, see "Getting Help."

E122D	Memory	One of the memory	Reseat the memory
	Regulator #	regulators has failed.	modules. See
	Failed.		"Troubleshooting System
	Reseat DIMMs.		Memory."
E122E	On-board	One of the on-board	Remove AC power to the
	regulator	voltage regulators failed.	system for 10 seconds and
	failed. Call		restart the system.
	support.		If the problem persists,
			see "Getting Help."
E1310	Fan ## RPM	RPM of specified fan is	See "Troubleshooting
	exceeding	outside of the intended	System Cooling
	range. Check	operating range.	Problems."
	fan.
E1311	Fan module ##	RPM of specified fan in	See "Troubleshooting
	RPM exceeding	specified module is outside	System Cooling
	range. Check	of intended operating	Problems."
	fan.	range.

24

About Your System