Cable Routing

Cables that extend through the system front-to-back are routed along a cable path within the interior right wall of the system chassis. The cables are secured by a cable retention bracket that attaches to the inner wall.

Removing the Cable Retention Bracket

1Remove the cooling shroud. See "Removing the Cooling Shroud."

2Remove the cooling fan bracket. See "Removing the Fan Bracket."

3Press outward on the blue release latch on the cable retention bracket and slide the bracket back until the tabs at the bottom of the bracket clear the chassis. See Figure 3-21.

4Lift the cable retention bracket off the chassis wall.

Figure 3-21. Removing and Installing the Cable Retention Bracket

34

2

1

 

6

 

 

1

cable retention bracket

2

release latch

3

hooks (3)

4

right chassis wall

5

chassis slots (6)

6

tab (3)

5

Installing System Components

111

Page 111
Image 111
Dell DL2100 Cable Routing, Removing the Cable Retention Bracket, 111, Chassis slots Tab Installing System Components