Dell DL2100 Opening and Closing the System, Installing the Front Bezel, Opening the System

Installing the Front Bezel

1Insert the hinge tab on the right of the bezel into the slot on the right side of the system front panel.

2Rotate the left side of the bezel toward the system.

3Press the bezel to the system to engage the latch.

Opening and Closing the System

WARNING: Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by yourself.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

Opening the System

1Unless you are installing a hot-swappable component such as a cooling fan or power supply, turn off the system and attached peripherals, and disconnect the system from the electrical outlet and peripherals.

2Rotate the latch release lock counter-clockwise to the unlocked position. See Figure 3-3.

3Lift up on the latch on top of the system and slide the cover back. See Figure 3-3.

4Grasp the cover on both sides and lift the cover away from the system.

Closing the System

1Lift up the latch on the cover.

2Place the cover onto the chassis and offset the cover slightly back so that it clears the chassis hooks and lays flush on the system chassis. See

Figure 3-3.

3Push down the latch to lever the cover into the closed position.

4Rotate the latch release lock in a clockwise direction to secure the cover.

78

Installing System Components