![](/images/new-backgrounds/1110910/110910159x1.webp)
Figure 3-4. Removing the Information Tag
1
1 information tag
Installing the Information Tag
1Align the information tag with the slot on the chassis.
2Slide the information tag into the chassis, until it locks into place
Hard Drives
Your system supports up to six
The hard drives are installed at the front of the system and connect to the system board through the SAS backplane. Hard drives are supplied in special
CAUTION: Before attempting to remove or install a drive while the system is running, see the documentation for the storage controller card to ensure that the host adapter is configured correctly to support
80