Figure 3-18. Installing a Storage Controller Card

2

1

3

4

5

8

7

1dedicated storage controller card connector

3integrated storage controller card

5SAS_1 connector

7SAS_0 connector

6

2 riser 1

4RAID battery connector (PERC only)

6connector locking tabs

8card edge guides (2)

3Slide the storage controller’s card edge connector into the card slot on the riser until the card is fully seated. See Figure 3-18.

4Connect the SAS_0 cable to the storage controller’s SAS_0 connector, and connect the SAS_1 cable to the controller’s SAS_1 connector.

NOTE: Be sure to connect the cable according to the connector labels on the cable. The cables are not operational if reversed.

5For a battery-cached PERC controller, install the RAID battery. See "Installing a RAID Battery."

Installing System Components

107

Page 107
Image 107
Dell DL2100 owner manual 107