Figure 3-9. Removing or Installing the Internal SD Module
3
2 | 4 | |
5 | ||
|
1
| 8 |
| 6 |
|
|
| |
| 7 |
|
|
1 | latch | 2 | internal SD module |
3 | SD flash card | 4 | SD card slot (SD connector) |
5 | release tab | 6 | internal SD module cable |
7 | internal SD module connector | 8 | control panel board |
4Connect the internal SD module cable to the connector on the control panel board. See Figure
5Close the system. See "Closing the System."
6Reconnect the system and peripherals to their power sources, and turn them on.
88
