Dell DL2100 Replacing the Riser 2 Board on the Expansion-Card Bracket, 121, Tab slot, Screw

Figure 3-25. Removing and Replacing the Riser 2 Board

2

1

3

4

5

1	expansion-card bracket	2	tab hook (4)
3	tab slot (4)	4	riser 2 board
5	screw

5Remove the expansion-card riser board:

a Using a Phillips screwdriver, remove the securing screw from the assembly. See Figure 3-25.

b Slide the riser board off of the four securing tab hooks. c Lift the riser board from the bracket.

Replacing the Riser 2 Board on the Expansion-Card Bracket

1Place the riser board in the expansion-card bracket so that the four tab hooks are fully inserted through the tab slots on the riser board. See Figure 3-25.

2Slide the riser board into the tab hooks.

3Using a Phillips screwdriver, secure the board with the Phillips screw.

Installing System Components

121