Dell DL2100 owner manual Removing an iDRAC6 Enterprise Card

Figure 3-11. Removing and Installing the iDRAC6 Enterprise Card

1	2
	3

5

1iDRAC6 Enterprise card

3VFlash SD card

5iDRAC6 Enterprise card connector

4

2 VFlash media slot

4 retention standoff posts (2)

Removing an iDRAC6 Enterprise Card

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System."

3If installed, remove all expansion cards from expansion-card riser 1. See "Removing an Expansion Card."

4Remove the VFlash media card (if installed) from the iDRAC6 Enterprise card. See "VFlash Media (Optional)."

5If present, disconnect the Ethernet cable from the iDRAC6 Enterprise card.

94

Installing System Components