Option

Description

 

 

F1/F2 Prompt on Error

Enables the system to halt on errors during POST,

(Enabled default)

which allows the user to observe events that may scroll

 

by unnoticed during normal POST. The user can press

 

<F1> to continue or <F2> to enter the System Setup

 

program.

CAUTION: When setting this option to Disabled, the system will not halt if an error occurs during POST. Any critical errors will be displayed and logged in the system event log.

Memory Settings Screen

Option

Description

 

 

System Memory Size

Displays the amount of system memory.

System Memory Type

Displays the type of system memory.

System Memory Speed

Displays the system memory speed.

Video Memory

Displays the amount of video memory.

System Memory Testing

Specifies whether system memory tests are run at system

(Enabled default)

boot. Options are Enabled and Disabled.

Memory Operating Mode

This field displays the type of memory operation if a

 

valid memory configuration is installed. When set to

 

Optimizer Mode, the memory controllers run

 

independently of each other for improved memory

 

performance. When set to Mirror Mode, memory

 

mirroring is enabled. When set to Advanced ECC

 

Mode, two controllers are joined in 128-bit mode

 

running multi-bit advanced ECC. For information about

 

the memory modes, see "System Memory."

Node Interleaving

If this field is Enabled, memory interleaving is supported

(Disabled default)

if a symmetric memory configuration is installed. If

 

Disabled, the system supports Non-Uniform Memory

 

architecture (NUMA) (asymmetric) memory

 

configurations.

 

 

Using the System Setup Program and UEFI Boot Manager

59

Page 59
Image 59
Dell DL2100 owner manual Memory Settings Screen