Xerox M950, m940 manual K I N G C O N N E C T I O N S, Connections

M A K I N G C O N N E C T I O N S

Connections

2	USB cable (shown)
	Connect cable.

Note: Make sure that all shipping tape is removed before connecting the cables.

Note: Your WorkCentre can be used as a stand alone machine for copying. It is not necessary to connect your PC when using your WorkCentre as a stand alone machine.

Note: Use only a USB cable or a parallel cable when connecting the WorkCentre and your PC. You must be running Windows 98 or Windows 2000 to use a USB cable. Otherwise use a parallel cable that is IEEE 1284-1994 compliant (Sold Separately).

AC power cord 1

Connect to the WorkCentre and a power outlet.

Note: When power is connected, the WorkCentre will automatically go through an audible priming cycle which lasts for approximately 2 minutes. For optimum performance do NOT unplug the copier.

G e t t i n g S t a r t e d

11