Xerox P1210UG-8 manual Push back on the Simm until it clicks into

P1210UG-8 6/30/00 3:59 PM Page 1.22

I N S T A L L I N G O P T I O N A L M E M O R Y

4	Push back on the SIMM until it clicks into
	place. (Make sure the SIMM is secured in

place by the metal clips.)

5

6

Replace the side cover and tighten the two outer screws.

Reconnect the power cord and printer cable. Turn the power on.

7Print a configuration sheet (hold down the print button until all lights blink, then release). Confirm the new memory value on your sheet.

1.22

U s e r G u i d e