Xerox P1210UG-8 manual N N E C T I O N S / C O N T R O L P a N E L

P1210UG-8 6/30/00 3:59 PM Page 1.4

C O N N E C T I O N S / C O N T R O L P A N E L

Connections

1

USB Cable Connect cable. (Sold separately)

or

Parallel Cable

Connect cable.

Caution: Turn off your computer before connecting your printer cable or power cord.

2AC Power Cord

Connect to your printer to a properly grounded outlet. Turn the power on.

1.4

Control Panel

Error Light

Blinking: Insufficient memory

On: Cover open, cartridge not installed or not seated properly

On with Paper Light: Paper jam

Paper Light

On: Out of Paper

On with Error Light: Paper jam

Cancel Button

To cancel print job, hold the cancel button until all lights blink, then release.

Print Button

To print a Configuration Sheet, hold the print button until all lights blink, then release.

U s e r G u i d e

Manual Light

On: Multi-purpose tray (manual feed) ready

Press print button to start job

Data Light

On: Ready to receive data

Slow blink: Receiving data

Fast blink: Printing

Note: When all lights are blinking, this indicates a system error. Turn the power off and then back on to clear. If problem persists, call your local Xerox Helpline.