Problem solving
3.Look for any jammed booklets within the SquareFold Trimmer Module paper path and remove them.
4.Check for loose trim scraps along the paper path and remove them.
5.Close the Top Left and Right Covers.
6.Empty the Trimmer Waste Container.
7.Ensure that the Trimmer Waste Container is completely pushed in/closed.
8.Ensure that all covers on the SquareFold Trimmer Module are closed.
9.If the SquareFold Trimmer Module Control Panel and/or the machine’s UI indicate there is a still a jam, recheck the SquareFold Trimmer Module (steps
10.If necessary, open the finisher to look for jams/faults along the finisher path.
11.Follow the instructions displayed on the machine’s UI to resume printing/copying.
SquareFold Trimmer User Guide | 13 |
