Xerox Document Centre Reference Guide Page 10 - 31
10. Tools
Image RotationWhen the orientation of the originals and the output paper does not
match, this feature allows the scanned original image to be rotated
automatically 90 degrees in order to fit on the output paper. This
feature only applies to copy jobs.
If either Auto% or Auto Paper are selected, all the documents must
be scanned, and the digital images rotated before printing will start,
which r equire s appro ximate ly one s econd p er imag e rotat ed. (T he 2-
sided copy option, Rotate Side 2 is not affected by these Image
Rotation settings).
By rotating the image 90 degrees, a single orientation of loaded
paper stock can be used for multiple job types. For example:
Reduce SEF 8.5 x 14 inch or 11 x 17 inch originals and rotate
the reduced image 90 degrees onto 8.5 x 11 inch LEF paper.
This eliminates the need to load and use SEF 8.5 x 11 inch
paper, which runs at half the rate of LEF paper.
Enlarge LEF 8.5 x 11 inch originals to SEF 11 x 17 inch paper.
This allows the originals to be loaded in the usual LEF
orientation, whether copied at 100% or enlarged beyond 100%.
Auto% will reduce or enlarge the original image automatically so
that it will fit on the selected copy paper.
Auto Paper automatically selects the best paper size for the original
being copied.
Tools Screen 1
System Setting
More
How to get here
System Setting
(On an ST model)
(On a DC model)
Tools Screen 1
System Settings 1
More
System Setting
System Settings 2
More
System Settings 3
Image Rotation
System Settings 2
Image Rotation