Page 16 - 4 Xerox Document Centre Reference Guide
Pathway Buttons The functions of the machine are divided into four separate and
distinct pathways, Features, Job Status, Machine Status and
Tools. Features contains all the programming selections needed to
produce the job. Job Status provides queue management functions,
Machine Status provides information about the projected
replacement requirements for consumables, and information
pertaining to the repair of the machine. The Tools pathway is
designed for the System Administrator to manage both the operation
and the troubleshooting of the machine.
Photograph A selection that optimizes a copy of a photograph or a document
having varying shades of grey. See continuous tone.
Platen This is also known as the Document Glass.
Print to Edge This feature allows the Document Centre to print an image
anywhere on the paper up to and including the very edge of the paper
stock.
Registration This term refers to the location of either the document as it is placed
on the Document Glass or in the Document Feeder. It can also refer
to the placement of the image as it appears on the output.
Resolution Quantifying the quality of print in terms of the number of dots per a
given area (typically an inch).
Scanning Sensing the image on an original and creating an electronic image of
the document.
Scan Once, Print
Many This Document Centre Feature enables the single scanning of a
document, regardless of the number of copies requested. After the
document is scanned once, it is Raster Image Processed (RIP) once,
temporarily stored to the image disk until the job is completed, then
the image is deleted.
Short Edge Feed
(SEF) As the paper is fed into the machine from either the Document
Feeder or any of the Paper Trays, the shortest edge of the paper
enters the machine first.