Roady Guide keys 4" x 4" 8/5/03 1:40 PM Page 15
14
Section |
|
|
You can set your radio to automatically shut off 60, 120, or 180 minutes after | ||
it is turned on. This feature should be used if your vehicle continues to power | ||
the cigarette lighter/auxiliary power after you remove your key, so if you leave | ||
4 | it on, Roady will shut down automatically after the time period you select and | |
will not drain your battery. |
| |
|
| |
| TuneSelect™ |
|
| Using this function, you can program your Roady to alert you with a tone | |
| and display change when a favorite song is played again on a channel other | |
| than the one you are listening to. |
|
| 1. While the song is playing, press and hold the Tuning Wheel | in for 2 |
| seconds. Roady will beep and display “Song Selected” on line 1 of the | |
| display for 2 seconds, then return to normal display for the current song. | |
| Up to 10 songs may be stored in the TuneSelect list. Once the list is filled, | |
| a new entry will replace the oldest item on the list. You can erase songs | |
| from your TuneSelect list by going into the menu and choosing TuneSelect. | |
| Then, follow your options to erase specific song titles or clear out all titles. | |
| 2. When the song plays again on any channel other than the one you are | |
| currently listening to, your Roady will beep and display an alert notice. | |
| “Song Found” will appear on line 1 and the name of the song on line 2 for | |
|
| 15 |
Direct Tune | in. Note: Roady does not have a preview mode when this | Section |
Tuning Wheel | ||
This feature changes the functionality of the Tuning Wheel so that it auto- |
| |
matically selects a channel each time it is rolled, without having to press |
| |
feature is active. |
| 5 |
|
| |
Installation
Roady Kit Set-up
Your Roady Kit contains the following components:
Car mount | XM Antenna | 12V power adaptor | Cassette audio | Cell phone mount |
|
|
| adaptor | adaptor |
Your kit also includes:
•Car mount bracket • Extra adhesive pad • Surface preparation cleaning kit
•Alcohol prep pad • Cable wrap
Figure 3. Roady Kit components.
5 seconds. |
|
|
3. While the “Song Found” alert is displayed, push the Tuning Wheel | in to | |
switch to the channel playing the song. If the Tuning Wheel | is not |
|
pressed while the alert is displayed, TuneSelect will time out and return to | ||
normal display mode. |
|
|
Hooking up your Roady Receiver
Figure 4. Connect accessories to your Roady Receiver as shown.
Caution: Connect only appropriate input devices to the Roady Receiver. Connecting an incorrect input device may damage the system and/or the external electronic device.
It is recommended that you use only the 12V to 6V conversion power adaptor that came with your Roady Kit.
