5.Continue with “Step 5: Connect the Magnetic Mount Antenna and PowerConnect Power Adapter” on page 37..
•SUV:
1.Feed the antenna cable underneath the rubber weather stripping of the rear tailgate window/door and route the cable along the rear hatch.. Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping.. Pull the cable out from weather stripping and route it into the cabin under the interior trim.. Avoid hinges or gears that could crimp or cut the cable..
2.Route the cable through the SUV’s main cabin area under the interior trim, towards the front of the vehicle.. Use a blunt
plastic putty knife or similar blunt tool to lift the plastic trim just enough to tuck the cable under underneath.. Avoid side airbag locations
on back pillars and
above the doors.. Airbag locations are marked with “SRS”
logos.. Be careful not to crimp or cut the cable..
3.Bring the cable out from the trim near the front of the cabin and route it under
33
