Yale RS2 manual Label 73901 73903 673-56 73905 673-57 Patent Label

KEY	NO.	PART NAME			PART NUMBER
NO.	REQ’D.			3/4 TON	1 1/2 TON		3 TON
673-51	1	Hook Block Screw		40854	40855		–
673-52	-	Load Chain (Specify Length Req’d.)		85839		85847
673-53	1	End Ring			40471
673-54	1	Capacity Label		73759	73751		73752
673-55	1	I.D. Label		73901		73903
673-56	1	Warning Tag			73905
673-57	1	Patent Label	(no longer available order 673-55)		–
673-58	1	Load Limiter Label (Only for units			73763
		with Load Limiter)
673-59	1	Load Limiter (Optional)		7310 P	7311 P		7311 P
673-60	1	Cam Washer			73316
673-61	1	Anchor Sling		7309 P	7312 P		–
*673-62	1	Lower Hook with latch (Latch type)		-	-		40606
673-63	1	Lower Hook Washer		-	-		50454
673-64	1	Lower Hook Nut		-	-		40382
673-65	1	Lower Hook Nut Pin		-	-		982335
673-66	3	Lower Hook Block Screw		-	-		940812
673-67	3	Lower Hook Block Screw L.W.		-	-		940830
673-68	3	Lower Hook Block Screw Nut		-	-		945820
673-69	1	Reeving Caution Plate		-	-		45757
673-70	1	Lower Sheave		-	-		40166
673-71	2	Lower Hook Block		-	-		40689
*673-72	1	Upper Hook with latch (latch type)		-	-		40606
673-73	1	Upper Hook Nut		-	-		40382
673-74	1	Upper Hook Nut Pin		-	-		982335
673-75	1	Hoist Hanger		-	-		73324
673-76	1	Dead End Pin		-	-		40851
**673-77	1	Upper hook block assembly (includes		73606	73607		-
		673-16,673-30 and 673-35)
673-78	2	Lock Pin		73340		73342
* If latchlok	hook is required, part numbers are: 3/4 ton upper and lower hooks - 1001, 1 1/2 ton				upper and lower hooks - 1002
** If latchlok hook is required, contact Yale.			3 ton lower hook - 1004, 3 ton upper hook - 1010

PART NUMBERS FOR PACKAGED LUBRICANTS USED IN THE RS2 LEVER HOISTS
(REFER TO PAGE 6 FOR LUBRICATION INSTRUCTIONS)
LUBRICANT	TYPE OF	PART NUMBERS AND
USAGE	LUBRICANT	PACKAGED QUANTITIES
		OF LUBRICANTS
3 TON LOWER SHEAVE BEARING	GREASE-GRAPHITE	40626 (1 LB., .46 Kg. CAN)
JOURNALS AND SEAT FOR HOOK KNOB	MIXTURE
(3/4 AND 1-1/2 TON)
TIP OF LEVER PLUNGER AND	DRY-LUBE OIL-	40628 (1 PT., .5L CAN)
THREADED END OF PINION SHAFT		GRAPHITE MIXTURE
INSIDE OF LEVER HEAD	GREASE	40630 (1 LB., .46 Kg. CAN)
GEARS, LIFTWHEEL SPLINE, NEEDLE		28610 (1 LB., .46 Kg. CAN)
BEARINGS, PINION BUSHING, CAM AND	GREASE
LOCK PINS, CAM SLOTS, AND I.D. OF CAM		28632 (4 LB., 1.8 Kg. CAN)
THREADS OF PINION	SPRAY DRY	46698 (16 OZ. CAN)
	LUBRICANT
LOAD CHAIN	OIL	28608 (1 PT., .5L CAN)
When ordering lubricants, specify	the type of lubricant, part number and packaged quantity required.
	Touch-up paint for the RS2:
*(1) case (12-12 oz. Aerosol Cans) of Yellow Touch-up Paint Part Number 40215.
*Touch-up paints are only available in case quantities.
NOTE: When painting the hoists, also order warning labels and
capacity labels that may be coating during painting.		13