Set the TIMER switch to the PLAY position.
Select the TAPE position.
Press the DISPLAY button.
Select the TUNER position.

HOW TO USE THE BUILT-IN TIMER

6

5

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

CLEAR 1

21

2 1

3

Before setting the timer clock, make sure that the current time is correct.

Timer operation

To listen to the tuner

1

2 Tune to the desired station. (Refer to the “TUNER OPERATION” on page 19.)

3

4 While the “TIMER” indicator is flashing, and while pressing the TIME ADJUST button, press the HOUR and MINUTE buttons to set the desired time.

5 Release the TIME ADJUST button.

*When the start time of the timer is set by mistake, press the CLEAR button and repeat step 4.

6 Press the TIMER button.

*“TIMER” appears on the display.

This sets the timer to the stand-by condition.

*The tuner turns on automatically at the desired time.

To play a compact disc

1 Select the CD position.

2 Load the disc.

3 Perform steps 3 – 6 of the “To listen to the tuner” section.

* CD playback starts automatically at the desired time.

To playback a cassette tape

1

2 Load a recorded cassette tape into the tape “a” or tape “b” cassette compartment.

*If tapes are loaded in both the compartments, tape “b” will be played back by the timer play.

3

4 Perform steps 3 – 6 of the “To listen to the tuner” section.

*Tape playback starts automatically at the desired time. (Playback of the side which corresponds to the play button which illuminated just before the timer setting was completed will commence.)

E-31