Select the TAPE position.

RECORDING

1

2

3

4

5

6

 

 

9

TIME

7

8

0

PROG

CLEAR

CALL

TIME

+10

REPEAT

 

 

 

CD

 

 

 

BAND

TUNER

b

 

 

 

 

a

 

 

 

 

HALL

JAZZ CLUB

ROCK CNCT

OFF

TAPE

POWER

AUX

DAT

- VOLUME +

2 1

3 4

To confirm tracks to be recorded and tracks which can not be recorded

Before recording, press the TIME button. The following information will appear on the display by turns whenever the TIME button is pressed.

→Tracks to be recorded on side A

↓

Tracks to be recorded on side B

↓

Tracks which can not be recorded on side A and side B (When all tracks can be recorded, “00 0:00” is

displayed) ↓Tracks which can be recorded on side A and side B

Note

Once CD playback starts, the display does not change.

Dubbing

•During dubbing, adjusting the VOLUME, BALANCE, TREBLE and BASS controls and selecting any sound processor program have no effect on the recorded sound.

•Try to use the same tape formula and length for the recording tape as for the master tape.

1

2 Load a prerecorded tape into the tape “a” cassette compartment. Insert a blank tape into the tape “b” cassette compartment.

3 Set the REVERSE MODE switch to to record on onlyone side, or to for continuous recording on both sides.4 Press the DUBBING button.

*Press “NORMAL” to dub at normal speed, and “HIGH” to dub at about twice the normal speed.

*Dubbing will begin from side A.To stop dubbingPress the stop button for tape “a” or “b”.* Tape “a” and tape “b” will stop at the same time.

Note

Only tapes originally encoded with Dolby B or C NR will be dubbed onto tapes with Dolby B or C NR encoding.

The DOLBY NR switch will have no effect on the recording of tape “b” during dubbing.

However, the playback tonal quality of tape “a” will change according to the DOLBY NR switch position.

E-29