HOW TO USE THE
Sleep timer operation
This unit can be turned off automatically.1 Play the desired sound source.2 Press the SLEEP button repeatedly until the desired sleep time appears in the display. The display will change as described below. (Time is displayed by the minute.)
60 | ↑ 45 ↑ 30 | ↑ 15 | ||||
↑ |
| Current Time | ↑ |
|
| |
|
|
|
|
| ||
|
|
|
| |||
*The original display mode will resume about 5 seconds after the selection is made.
*If the current time is selected, the power is turned off after 2 seconds.3 The unit will turn off automatically after the preset sleep time.To confirm the sleep time settingPress the SLEEP button once. The remaining time of the preset sleep time appears in the display.
To change the sleep timeWhile the “SLEEP” indicator is on, press the SLEEP button repeatedly until the desired time to replace appears. The display will change as described below.
| Remaining time of | ↑ | Current time ↑ | 60 | ||
the preset sleep time |
| ↑ |
|
| ↑ |
|
| 15 | ↑ | 30 ↑ | 45 |
*If the current time is selected, the power is turned off after 2 seconds.
To stop the sleep timer operationPress the POWER switch.
(The “SLEEP” indicator will go out.)Using the timer and the sleep timer at the same time
1 Prepare timer playback. (See page 31.)2 Press the SLEEP button and set the sleep time.*When the sleep timer operation finishes, the timer will function to turn the source on at the preset time.
Notes
*The source set in the sleep timer operation will be turned on at the time set in the timer playback operation.
*Do not set the timer time so that the timer will start during sleep timer operation. (Since sleep timer operation has priority, the timer will not operate.)