Yamaha CC-5 Program play, COMPACT DISC OPERATION, CALL, CLEAR, Notes, Notes, Track number, Playback order, Music schedule, Playback order, Music schedule

Load a disc and close the disc table.

COMPACT DISC OPERATION

1 2 3 4 5

2	6	7	8	9	0	3
	PROG	CLEAR	CALL	TIME	+10
						5
	REPEAT				CD
				BAND	TUNER
	b
	a
	HALL	JAZZ CLUB	ROCK CNCT	OFF	TAPE
	POWER	AUX	DAT	- VOLUME +

	Playback order		Total playing time
		PROGRAM	TOTAL
1	2	3	10
	12

Music schedule

1	2	3	4	5
6	7	8	9	0		CALL
PROG	CLEAR	CALL	TIME	+10
REPEAT				CD
			BAND	TUNER		CLEAR
b
a
HALL	JAZZ CLUB	ROCK CNCT	OFF	TAPE
POWER	AUX	DAT	- VOLUME		+

Playback order			Track number
		PROGRAM	TOTAL
1	2	3	10
	12

Music schedule

Program play

You can program up to 20 tracks in any desired order.

1

2 When in the stop mode, press the PROGRAM button to prepare for programming.* The “PROGRAM” indicator will flash.3 Use the track number input buttons to select the desired track number.*The selected track number will be displayed.

*The programmed playback order and the total play time of the programmed tracks will be automatically displayed, and only those track numbers will appear in the music schedule.

*For example, to choose selection 12 (1)Press the “+10” button.(2)Within 3 seconds, press the “2” button.4 Repeat step 3 for any other track. Up to 20 tracks can be programmed.5 Press the play button to start playback of programmed selections.

Notes

•It is also possible to program a sequence of tracks while looking at the list of tracks on the surface of the disc before closing the disc table.

•During playback or pause, programming is not possible.To check the program data

Press the CALL button while the disc is stopped to review the order of the programmed sequence before playback begins.

*While the playback order and track numbers are displayed, the track numbers on the music schedule will also flash on and off in the same order.

Press the CALL button during playback or pause to check the number of the next track to be played.

To cancel the programmed sequence

Press the CLEAR button while the disc is stopped and the “PROGRAM” indicator is lit.

*To cancel the last programmed track during programming, press the CLEAR button when the “PROGRAM” indicator is flashing.

Notes

•Opening the disc table automatically cancels the programmed sequence.•Programming and cancelling are not possible during playback or pause.

E-16