HOW TO USE THE BUILT-IN TIMER

POWER DISPLAYVOLUME2 1
To record tuner programs

1 Load a blank cassette tape into the tape “b” cassette compartment.

2 Set the TIMER switch to the REC position.

3 Perform steps 1 – 5 of the “To listen to the tuner” section on the previous page.

* Recording starts automatically at the desired time.

Notes

•The power will be automatically turned off 2 hours after the timer starts.

•To set the desired volume level for listening to a source with the timer, use the VOLUME control before setting the timer.

•Except when you perform recording with the timer, be sure to set the TIMER switch to the PLAY position.

To confirm the timer time setting

Press the DISPLAY button.

To cancel the timer operation

Press the POWER switch.

*The “TIMER” indicator will go out.

*Unless the AC supply lead is unplugged or there is a power failure, the time set on the timer will be retained until it is reset.

E-32