Control Names and Functions
CP300 Owner’s Manual
22
Basic Operation
™A to D [–][+] buttons (page 15)
For selecting parameters and changing values while viewing
the display.
£Display (page 15)
For showing various messages and certain settings of the
instrument.
¢[CONTRAST] knob (page 13)
Adjusts the brightness of the display.
∞[EXIT] button (page 15)
Returns to the initial display (the display that first appears
when the power is turned on).
§Voice group buttons (pages 25, 40)
These let you select from sixteen groups of Voices, including
grand piano. You can also select a Performance if the
[PERFORMANCE] button is turned on.
¶[VOICE EDIT] button (page 56)
Enables selection of detailed settings of the sounds and effects.
•[SPLIT] button (page 31)
Allows you to play different Voices on the left- and right-hand
sections of the keyboard.
ªVARIATION [▼][▲] buttons (page 25)
Enables selection of alternate Voices in the selected Voice
group.
‚[REVERB], [CHORUS] buttons (page 35)
These add ambience (Reverb) and depth (Chorus) to the
sound. You can turn the corresponding effect on or off with a
single touch.
⁄MASTER EQ EDIT [▼][▲] buttons (page 72)
Enables selection of detailed settings for the Master Equalizer.
¤[SPEAKER] button (page 52)
Switches the built-in speakers on or off.
‹[CLICK] button (page 38)
Switches the click function on or off.
›[MIDI SETTING] button (page 64)
Enables selection of detailed MIDI settings.
fi[OTHER SETTING] button (page 67)
This lets you make detailed settings, such as adjusting the
keyboard touch or making fine adjustments to the scale.
fl[MASTER EQUALIZER] sliders (page 36)
These five sliders adjust the tone of each band: LOW (low
band) to HIGH (high band).
1[AC INLET] jack (page 11)
Connect the supplied AC power cord here. Use only the AC
power cord supplied with the CP300.
2[ASSIGNABLE FOOT PEDAL] jacks
(pages 11, 33)
For connecting the included pedal (FC3), an optional FC4/5
foot switch, or FC7 foot controller.
3MIDI [IN][OUT][THRU] connectors (page 90)
For connecting external MIDI devices, allowing the use of
various MIDI functions.
4[USB] connector (page 92)
For connecting the CP300 and computer.
5OUTPUT [L][R] jacks (page 88)
These jacks output balanced audio signals, and are for
connection to an external device such as a mixer.
6OUTPUT [L/MONO][R] jacks (page 88)
These jacks output stereo audio signals (1/4" mono phone
plug). For monophonic output, use just the L/MONO jack.
7INPUT [L/MONO][R] jacks (page 89)
External audio signals can be input via these phone jacks (1/4"
mono phone plug). The sound of an external instrument can
be reproduced via the CP300’s speakers. Use 1/4" mono
phone plugs. For stereo input from an audio device, connect
to both the L/MONO and R jacks.
Rear PanelAC INLET ASSIGNABLE FOOT PEDAL
1
SUSTAIN 4
AUX
3
SOFT
2
SOSTENUTO
MIDI
IN OUT THRU
USB OUTPUT OUTPUT INPUT
RL RL/MONO R L/MONO
1234567