Yamaha CP300 - page 95

Message List

CP300 Owner’s Manual 95

Appendix

The instrument’s ﬂash memory (storage memory) has expired.

Consult your Yamaha dealer. If this message appears, the instrument will not be able to back

up the Songs, Performance ﬁles and settings in memory. Press the [EXIT] button to return to

the original display.

There is a problem with the USB connector.

The power to the computer is turned off, the cables are connected incorrectly, or the driver

or MIDI application on the computer is working incorrectly. In this situation, turn the power off

to both the instrument and the computer, and check the cable connection. Then, turn on the

power to the computer and the instrument in this order and check to see if the driver and

MIDI application on the computer work properly.

This message is also shown if the USB cable is connected to the instrument without being

connected to your computer. When you wish to use the instrument alone, turn off the power

of the instrument, disconnect the USB cable from the instrument, then turn the power on

again. If the cable is left connected in this condition, the instrument may not function

properly.

The power was incorrectly turned off the previous time. The instrument is

checking the internal memory.

You turned off the power to the instrument while it was writing data to storage memory. This

message appears next time you turn on the power. The internal memory is being checked

while this message is displayed. If it has been conﬁrmed that any ﬁles in the storage

memory are corrupted, all the ﬁles will be deleted.

Some ﬁles in the storage memory have been restored.

This message appears following the message “Last Power Off Illegal / Memory File

Checking,” indicating that the instrument recovered as much data in the storage memory as

possible.

Files on the storage memory have been deleted.

This message appears following the message “Last Power Off Illegal / Memory File

Checking,” indicating that the instrument could not recover data in the storage memory and

that all memory ﬁles were deleted.

A memory problem has occurred.

While a Song or a Performance ﬁle was being loaded, the instrument detected defects in

memory. Reset the instrument to its normal (factory default) settings with “Memory File

Included” (page 71) after you back up all Song data.

There may be a memory problem.

1. This message indicates that there may be a problem with the memory when selecting a

Song or Performance ﬁle. If the message appears repeatedly when you continue using

the instrument, back up the Song data, then restore the default setting by using “Memory

File Included” in “Factory Set” (page 71).

2. This message will appear if a different “Character Code” (page 84) is selected than was

when you assigned the Performance ﬁle name. In this case, switch the “Character

Code,” re-select the Performance ﬁle.

There is no more available space in storage memory.

There is not enough memory space left and you cannot save any more Songs or

Performance ﬁles. Delete some Songs or Performance ﬁles in the storage memory (pages

80, 83), then save the new data to memory.

There is no Song to be saved.

This message will appear if there is no Song for the “Save To Memory” (page 82) operation

to save. In this case, no Song will be saved.

There is no ﬁle to be deleted.

You tried to delete a ﬁle that does not exist in the storage memory. You cannot delete the ﬁle.

There is no Song to be deleted.

You tried to delete a Song that does not exist in the storage memory. The Song cannot be

deleted.

Message Description

FlashMemoryLifeTime

Exit-->

HostError

LastPowerOffIllegal

MemoryFileChecking

LastPowerOffIllegal

MemoryFileErrorRecovered

LastPowerOffIllegal

MemoryFileErased

MemoryError

MemoryFull

NoSong

NoFileToDelete

NoSongToDelete