Yamaha DPX-1300 G manual Projection, Using the Input button to select a signal

Selecting an input signal

<Using the INPUT button to select a signal>

Remote cotrol			Main unit
			+ button
AUTO
			STANDBY/ON
V. POS	ZOOM	FOCUS
IRIS	SETTING	PATT
			ESCAPE	MENU
ESCAPE		MENU
			PATTERN	SETTING
			button
			ASPECT	INPUT
ASPECT		INPUT	LAMP COVER TEMP	FAN
RESET		HIDE
STILL		LIGHT
	INPUT		INPUT button
S VIDEO	A	HDMI
VIDEO	B	DVI

D4

MEMORY

123

456

Cursor button

1. Press the INPUT button.	Input signal
The input signal selection menu appears on	VIDEO
	S VIDEO
the display.
	INPUT A
	INPUT B
	HDMI
	DVI
	D4
2. Use the h or g buttons to select	Input signal
an input signal, then press the	VIDEO
button.	S VIDEO
	INPUT A
	INPUT B
	HDMI
	DVI
	D4

Warning

•You can select [Component], [RGB PC], or [RGB TV] for INPUT A and INPUT B, or [Auto], [Component], or [RGB TV] for HDMI, from the submenu. If you do not select a setting, the unit continues to use the setting from the last signal it received. To change this setting, carry out the following procedure.

3.Press the + button to open the submenu.

Input signal

VIDEO

S VIDEO

INPUT A

INPUT B

HDMI

DVI

D4

The mark to the right of the input signal name indicates that there is a submenu available for selection.

8

Projection

4.Select an appropriate setting from [Component], [RGB PC], or

[RGB TV] and press the button to confirm the setting.

Memo

Input signal
VIDEO
S VIDEO
INPUT A	Component
INPUT B	RGB PC
HDMI	RGB TV
DVI
D4

•If you set your laptop or notebook computer to display on its built-in display and on an external monitor simultaneously, the main unit may not project the image correctly. In this case, set your computer to display on the external monitor only. Refer to your computer’s operating instructions for further details.

English

21