5
Controls and functions
3
English
HDMIDVI
G/Y B/PB/CBR/PR/CR
INPUT A
HD/SYNC VD
OUT IN
REMOTE TRIGGER OUT
S VIDEO VIDEO
INPUT B
RGB/YPBPR/YCBCR
RS-232C
D4 VIDEO
wq
8
765432190
ert
◆Main unit <Rear panel / Connections>
1INPUT B (D-sub 15 pin)
Receives component video and RGB (RGB/YPBPR/YCBCR)
signals. Use a D-sub monitor cable to connect components to
this jack.
2D4 VIDEO (D jack)
Receives signals output from the D jacks of other AV
components. It is compatible with D1 - D4 formats.
3- 7 INPUT A (BNC jacks)
Receive component video and RGB signals. Connect
component signal connectors from AV components to input
jacks 3 - 5, and RGB signal connectors from computers to
input jacks 3 - 7. Use BNC cables for these connections.
3G/Y (G, or luminance signal)
4B/PB/CB(B, or color difference signal)
5R/PR/CR(R, or color difference signal)
6HD/SYNC (Horizontal sync signal, composite sync signal)
7VD (Vertical sync signal)
8S VIDEO (Mini DIN jack)
Receives signals from S-VIDEO output jacks of other AV
components. Use an S-VIDEO cable for these connections.
9AC inlet
Insert the supplied AC power cable here.
0VIDEO (Pin Jack)
Receives composite video signals from the VIDEO output
jacks of other AV components. Use a video pin cable for these
connections.
qDVI (DVI jack)
Receives RGB signals from computers or AV components. Use
a DVI cable for this connection.
wHDMITM (HDMITM jack)
Receives HDMITM signals from computers or AV components.
eREMOTE IN / OUT jack
Connect the remote control to the REMOTE IN jack if you
want to use it through a cable. The REMOTE OUT jack
outputs the signal received through the REMOTE IN jack
without any change.
rRS-232C (D-sub 9 pin)
For use in servicing this unit.
tTRIGGER OUT
Outputs control signals to external components. This output
provides a potential of 12 V/ maximum 200 mA when this unit
is projecting. Use the supplied trigger-out DC plug (for US
model only) to control external components.
Rear remote control sensor
11_DPX-1300_E.p65 9/20/05, 5:07 PM5