Yamaha DPX-1300 G manual Menu

Menu items

Hue	Sets the hue or phase of the image.
(Input signal)	•	+ side (0 to +50)	: Shifts the hue towards blue coloration.
	•	- side (-50 to 0)	: Shifts the hue towards red coloration.
Video/S-Video/Component/RGB TV

Saturation	Adjusts the degree to which color depth is expressed in the image.
(Input signal)	•	+ side (+100 to + 150)	: The unit projects colors with greater depth.
	•	- side (+50 to +100)	: The unit projects colors with less depth.
Video/S-Video/Component/RGB TV

Sharpness Gain	Adjusts the clearness of the image edges.
(Input signal)	Increase this figure to render a sharper image or reduce it to give a softer image with less
	image noise.
Video/S-Video/Component/RGB TV
	Choices: 0 to 20

Sharpness Type	Changes the characteristics of the filter used for “Sharpness Gain”
(Input signal)	(described above).
Video/S-Video/Component/RGB TV	When setting the [Sharpness Gain] parameter to render a relatively strong image (closer to
	20), increase this figure to enhance clearness of the image or reduce this figure to enhance
	softness of the image.
	You cannot adjust this parameter if [Sharpness Gain] is set to [0].
	Choices: 1 to 20

Color Adjustment

(Input signal) Video/S-Video/Component/

RGB TV/RGB PC/D4 VIDEO

Adjusts color balance.

There are three menus, [Standard], [WRGB], and [WRGBYCM], separated in order of complexity from simple to detailed. By the default setting, the DPX-1300 automatically selects BT709 (RGB color coordinate for High-Definition Television) for HDTV (High- Definition Television) or PC video input and BT601 (RGB color coordinate for Standard Television) for SDTV (Standard Television) input. Refer to page 42 for parameter operation methods.

The present color temperature setting is displayed to the right of the menu items.

		-	The current color temperature is displayed.
Color Adjustment	Standard	6700K +0.000uv

- Standard

y

Adjusts color temperature and hUV only. hUV adjusts values within the

maximum color temperature limits of the0.5 projector.

0.0

0.0

Color Temp.

(Input signal) Video/S-Video/Component/RGB TV/RGB PC

Adjusts color temperature.

Adjusts the level of white in colors between red and blue, and between green and magenta. Increase the color temperature to increase the amount of blue in an image, giving bright color tones. Reduce the color temperature to increase the amount of red, giving a darker, more relaxed atmosphere to the image.

Choices: 5,000 to 10,000

W (Color temperature and h UV)

0.5x

Color temprature adjustment

9

Menu

White Correction

(Input signal) Video/S-Video/Component/RGB TV/RGB PC

Adjusts hUV.

Increasing the hUV setting increases the amount of green in the image. Decreasing this setting increases the amount of magenta.

Choices: -0.02 to +0.02

hUV

+

–

English

31