Manuals / Brands / Home Audio / Stereo Amplifier / Yamaha / Home Audio / Stereo Amplifier

Yamaha DSP-A2 mConnecting an external decoder of a future format to this unit

1 78

Download 78 pages, 1.3 Mb

PREPARATION

mConnecting an external decoder of a future format to this unit

This unit is equipped with additional 6-channel audio signal input terminals (for left main, right main, center, left rear surround, right rear surround and subwoofer channels) for inputting signals from an external decoder of a future format to this unit.

To listen to a sound by reproducing signals input to these terminals, press the EXT. DECODER button on the front panel so that “EXT. DECODER IN” appears on the display. By doing so, the signals input to these terminals are sent to the corresponding SPEAKERS terminals and OUTPUT terminals of this unit.

Notes

●When signals input to these terminals are selected, the digital sound field processor cannot be used.

●The settings of “1A” to “1E” in the SET MENU mode have no effect on the signals input to these terminals. The setting of “1F. MAIN LEVEL” is effective. (Refer to pages 26 to 27 for details.)

●The adjustments of the output level of the center speaker, rear speakers and subwoofer are effective when the signals input to these terminals are selected as the input source. (Refer to pages 43 to 44 for details.)

(Europe model)

External decoder

MAIN OUT

GND	AUDIO SIGNAL	AUDIO SIGNAL	VIDEO	VIDEO SIGNAL
			VIDEO	S VIDEO
				S VIDEO
	PHONO	DVD/LD		DVD/LD
DIGITAL	1
RF SIGNAL	1	TV/DBS		TV/DBS
DVD/LD	CD	TV/DBS		TV/DBS
CD	3	IN		IN
COAXIAL	IN	IN		IN
COAXIAL	(PLAY)
OPTICAL	TAPE/MD	VCR 1		VCR 1
CD	4	OUT		OUT
	OUT	OUT		OUT
	OUT
	(REC)
	MAIN	IN		IN

SURROUND OUT

CENTER SUBWOOFER

OUT OUT

	IN		VCR 2	VCR 2
	(PLAY)	SURROUND	OUT	OUT
	TAPE/MD	SURROUND	OUT	OUT
	TAPE/MD
	OUT		2
	(REC)		2
	(REC)		TUNER
			TUNER
	DVD/LD	SUB WOOFER	CENTER	S VIDEO
		SUB WOOFER	CENTER

		EXTERNAL DECODER INPUT		MONITOR
		EXTERNAL DECODER INPUT		OUT
	TV/DBS			OUT
	TV/DBS

VIDEO

DIGITAL SIGNAL

20

Contents

NATURAL SOUND AV AMPLIFIER AMPLIFICATEUR AUDIO-VIDEO OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG Page CONTENTS English Selecting the output modes Recording a source to tape (or MD) or dubbing Using digital sound field processor (DSP) CAUTION : Read this before operating your unit INTRODUCTION Features Power, 0.02% THD, 20–20,000Hz What’s DSP Dolby Digital DTS Digital Surround Dolby Pro Logic + 2 Digital Sound Fields Dolby Digital or DTS + 3 Digital Sound Fields GETTING STARTED Getting started Installing batteries in the remote controller Notes about the remote controller Battery replacement Remote controller operation range Controls and their functions Page Display panel PREPARATION Speaker setup mRecommended speaker system configurations 4 Speaker System 5 Speaker System 6 Speaker System 7 Speaker System Connections m Basic connections of video units VIDEO AUX terminals (on the front panel) PAL/NTSC switch (China and General models only) PAL/NTSC switch mConnecting to digital (OPTICAL and COAXIAL) terminals mConnecting to DOLBY DIGITAL RF output of the DVD/LD/CD combi-player mConnecting to S VIDEO terminals Notes about the Video superimpose mConnecting an external decoder of a future format to this unit How to Connect: Note on main speaker connections: Note on a subwoofer connection: mIMPEDANCE SELECTOR switch IMPEDANCE SELECTOR 1 MAIN PRE OUT/MAIN IN terminals 3CENTER terminal 4FRONT terminals 5REAR (SURROUND) terminals 2SUBWOOFER terminal AC OUTLET(S) Voltage Selector (China and General models only) On screen display Selecting the output modes (“SET MENU” mode) 1C. MAIN SP 1E. SYS. SETUP 1D. LFE/BASS OUT 1F. MAIN LEVEL mChanging selections 2, 3 Speaker balance adjustment Page 11 BASIC OPERATION Playing a source Page When you finish using this unit mSwitching the input mode vFor CD, TAPE/MD and TV/DBS sources: AUTO: DTS: ANALOG Page Recording a source to tape (or MD) or dubbing from tape (or MD) to tape (or MD) mRecording the playing source to tape (or MD) 3, 5 Page Page Page Page Page Page Page Page Page Page Page ADVANCED FEATURES “SET MENU” mode 1.SPEAKER SET (Selecting the output modes suitable for your speaker system) 2. DLBY DGTL (DOLBY DIGITAL) SET 2B. D-RANGE(Adjusting dynamic range) 4. CENTER DELAY [Adjusting the delay of center sounds (dialog etc.)] 5. PARAMETER INI (Initializing parameters on a DSP program) 6. MEMORY GUARD (Locking DSP parameters and other adjustments) 8. DIMMER (Changing brightness of the display panel) Creating your own sound fields mSelecting and editing program parameters 4, 5 P. ROOM SIZE (Presence Room Size) S. ROOM SIZE (Surround Room Size) P. INIT. DLY (Presence Initial Delay) S. INIT. DLY (Surround Initial Delay) LIVENESS (Presence Liveness) S. LIVENESS (Surround Liveness) ●REV. LEVEL (Reverberation Level) ●S. DELAY (Surround Delay) Setting the SLEEP timer REMOTE CONTROLLER Basic operation (Cover is open) Page Using the “learning-capable”keys (Cover is open) Keys which can have three functions (1, 2, 3, 4) Empty keys (1, 2) Using OPERATION CONTROL keys (Cover is closed) About the lighting of keys Macro operations (Cover is closed) Page Methods of learning and clearing functions mMaking a new macro mClearing learned functions To Clear a Learned Function To Clear All Learned Functions TROUBLESHOOTING Remote controller When playing back a source encoded with DTS: SPECIFICATIONS VIDEO SECTION GENERAL