Yamaha DSP-A2 manual 11

	1	2	3	PHONO
	JAZZ	ROCK	ENTER-
	CLUB	CONCERT	TAINMENT
	4	5	6	EXT. DEC.
	STADIUM	CONCERT	TV
		VIDEO	THEATER
	7	8	9	EFFECT
	MOVIE	MOVIE	/DTS	ON/OFF
	THEATER 1 THEATER 2		SURROUND
	10	11	12
11, 13	LEVEL PARAMETER			12
	SLEEP ON SCREEN
	TEST
		SET MENU
		SYSTEM		MASTER VOLUME
	TV	POWER ON
				MUTE
	VCR
		STANDBY

PREPARATION

English

11 For the front effect speaker level adjustment, press			13 When the adjustment is finished, press the TEST
the TEST key on the remote controller again so that				key once again to cancel the test tone.
“TEST DSP” appears on the display.				Remote control
Remote control
				TEST
TEST
					Disappears
A calibration signal should be heard from the main
			Notes
speakers and the front effect speakers in turn.
			●	Once you have completed these adjustments, you can
		Main		adjust the sound level on your audio system by using the
				VOLUME control (or the MASTER VOLUME keys on the
				remote controller) only.
			●	If you use external power amplifiers, you may also use
		Front effect		their volume controls to obtain proper balance.
			●	If the function “1A. CENTER SP” in the SET MENU mode
				is set in the “NONE” position, in step 10, the sound output
				level of the center speaker cannot be adjusted. This is
12 Adjust the front effect speaker level by pressing the
				because in this mode, the center sound is automatically
				output from the left and right main speakers.
+ or – key so that it becomes almost the same as
the main speakers.			●	If there is insufficient sound output from the center and
* While adjusting, the test tone is fixed on the front				rear speakers, you may decrease the main speaker
effect speaker.				output level by setting the function “1F. MAIN LEVEL” in
	Remote control			the SET MENU mode in the “–10dB” position.

*Pressing the or key makes the test tone fix on the left front effect speaker and the right front effect speaker respectively. This is helpful for you to check that each speaker is correctly connected to this unit.

31