Yamaha DSP-A2 Setting the SLEEP timer, English, SLEEP OFF, To set the SLEEP time, To cancel the SLEEP timer

ADVANCED FEATURES

Setting the SLEEP timer

Use the built-in SLEEP timer to automatically turn this unit into the standby mode after the time you set elapses. The SLEEP timer is useful when you plan to fall asleep while this unit is playing back or recording a source. The SLEEP timer also automatically turns off external units connected to the SWITCHED AC OUTLET(S) on the rear of this unit. The SLEEP timer can only be set using the remote controller.

English

To set the SLEEP time

1 Select the source using the INPUT SELECTOR and start playback (or select a broadcast station) on the source unit.

2 Press the SLEEP key repeatedly until the desired SLEEP time appears on the display.

*“SLEEP time” is the time that elapses before this unit is automatically turned into the standby mode.

SLEEP

Indicates the SLEEP time.

	DVD/LD	TAPE/MD
	TV/DBS	CD
	VCR 1	TUNER
	VCR 2	PHONO
SPEAKERS	V-AUX
A		SLEEP

Flashes.

Each time you press the SLEEP key, the SLEEP time changes as follows.

(Minutes)

120 90 60 30

SLEEP OFF

(The SLEEP timer is off.)

After a while, the display returns to the original indication.

To cancel the SLEEP timer

Press the SLEEP key repeatedly until “SLEEP OFF” appears on the display. (After a while, the display returns to the original indication.)

SLEEP

Note

The SLEEP timer setting can also be canceled by setting this unit into the standby mode with the STANDBY/ON switch on the front panel (or the STANDBY key on the remote controller) or disconnecting the power plug of this unit from the AC outlet.

59