Yamaha DSP-A2 51

BASIC OPERATION

●Program No. 12 is for reproducing video discs, video tapes and similar sources which are encoded with Dolby Surround (bearing the “DOLBY SURROUND” or “DOLBY DIGITAL” logo) or encoded with DTS (bearing the “dts” logo).

No.

PROGRAM

SUBPROGRAM (TYPE)

FEATURE

12

/DTS

PRO LOGIC/Normal (

PRO LOGIC

)

The built-in Dolby Pro Logic Surround decoder, the Dolby

SURROUND

Functions when the input signal is analog

Digital decoder or the DTS decoder precisely reproduces

or PCM audio or encoded with Dolby

sounds and sound effects of a source encoded with Dolby

Digital in 2 channels.

Surround or DTS. The realization of a highly efficient

decoding process improves crosstalk and channel

DOLBY DIGITAL/Normal (

DIGITAL )

separation and makes sound positioning smoother and

Functions when the input signal is encoded

more precise.

with Dolby Digital not in 2 channels.

DTS DIGITAL SUR./Normal (

)

Functions when the input signal is encoded

with DTS.

PRO LOGIC/Enhanced

Ideally simulates the multi-surround speaker systems of

(

PRO LOGIC

DSP

)

the newest film theater. The digital sound field processing

Functions when the input signal is analog

and the Dolby Surround decoding or the DTS decoding

or PCM audio or encoded with Dolby

are precisely performed without altering the originally

Digital in 2 channels.

designed sound orientation. The surround effects

produced by this sound field fold the viewer naturally from

DOLBY DIGITAL/Enhanced

the rear to the left and right and toward the screen.

(

DIGITAL

DSP

)

Functions when the input signal is encoded

with Dolby Digital not in 2 channels.

DTS DIGITAL SUR./Enhanced

(

DSP

)

Functions when the input signal is encoded

with DTS.

Note: If the “NONE” position is selected on “1A. CENTER SP” in the SET MENU mode, no sound is output from the center speaker(s).

English

49

Contents

NATURAL SOUND AV AMPLIFIER AMPLIFICATEUR AUDIO-VIDEO OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG Page CONTENTS English Selecting the output modes Recording a source to tape (or MD) or dubbing Using digital sound field processor (DSP) CAUTION : Read this before operating your unit INTRODUCTION Features Power, 0.02% THD, 20–20,000Hz What’s DSP Dolby Digital DTS Digital Surround Dolby Pro Logic + 2 Digital Sound Fields Dolby Digital or DTS + 3 Digital Sound Fields GETTING STARTED Getting started Installing batteries in the remote controller Notes about the remote controller Battery replacement Remote controller operation range Controls and their functions Page Display panel PREPARATION Speaker setup mRecommended speaker system configurations 4 Speaker System 5 Speaker System 6 Speaker System 7 Speaker System Connections m Basic connections of video units VIDEO AUX terminals (on the front panel) PAL/NTSC switch (China and General models only) PAL/NTSC switch mConnecting to digital (OPTICAL and COAXIAL) terminals mConnecting to DOLBY DIGITAL RF output of the DVD/LD/CD combi-player mConnecting to S VIDEO terminals Notes about the Video superimpose mConnecting an external decoder of a future format to this unit How to Connect: Note on main speaker connections: Note on a subwoofer connection: mIMPEDANCE SELECTOR switch IMPEDANCE SELECTOR 1 MAIN PRE OUT/MAIN IN terminals 3CENTER terminal 4FRONT terminals 5REAR (SURROUND) terminals 2SUBWOOFER terminal AC OUTLET(S) Voltage Selector (China and General models only) On screen display Selecting the output modes (“SET MENU” mode) 1C. MAIN SP 1E. SYS. SETUP 1D. LFE/BASS OUT 1F. MAIN LEVEL mChanging selections 2, 3 Speaker balance adjustment Page 11 BASIC OPERATION Playing a source Page When you finish using this unit mSwitching the input mode vFor CD, TAPE/MD and TV/DBS sources: AUTO: DTS: ANALOG Page Recording a source to tape (or MD) or dubbing from tape (or MD) to tape (or MD) mRecording the playing source to tape (or MD) 3, 5 Page Page Page Page Page Page Page Page Page Page Page ADVANCED FEATURES “SET MENU” mode 1.SPEAKER SET (Selecting the output modes suitable for your speaker system) 2. DLBY DGTL (DOLBY DIGITAL) SET 2B. D-RANGE(Adjusting dynamic range) 4. CENTER DELAY [Adjusting the delay of center sounds (dialog etc.)] 5. PARAMETER INI (Initializing parameters on a DSP program) 6. MEMORY GUARD (Locking DSP parameters and other adjustments) 8. DIMMER (Changing brightness of the display panel) Creating your own sound fields mSelecting and editing program parameters 4, 5 P. ROOM SIZE (Presence Room Size) S. ROOM SIZE (Surround Room Size) P. INIT. DLY (Presence Initial Delay) S. INIT. DLY (Surround Initial Delay) LIVENESS (Presence Liveness) S. LIVENESS (Surround Liveness) ●REV. LEVEL (Reverberation Level) ●S. DELAY (Surround Delay) Setting the SLEEP timer REMOTE CONTROLLER Basic operation (Cover is open) Page Using the “learning-capable”keys (Cover is open) Keys which can have three functions (1, 2, 3, 4) Empty keys (1, 2) Using OPERATION CONTROL keys (Cover is closed) About the lighting of keys Macro operations (Cover is closed) Page Methods of learning and clearing functions mMaking a new macro mClearing learned functions To Clear a Learned Function To Clear All Learned Functions TROUBLESHOOTING Remote controller When playing back a source encoded with DTS: SPECIFICATIONS VIDEO SECTION GENERAL