Yamaha DVX-S200, DVR-S200 No low tones, Strange humming noises, No sound from the Subwoofer, No sound from the Center Speaker, No sound from the Surround Speakers

Appendix

No sound except from the Front Speakers.

Cause1 You are listening to STEREO sound.

Solution		Press STEREO and make sure sound field
		effect is on.
Cause	2 You are playing a source such as Dolby
		Surround, Dolby Digital or DTS that doesn’t

contain a special effect signal.

Solution Select another DSP Program.

Cause	3 A digital audio sampling frequency over 48
	kHz is input.

A digital audio sampling frequency over 48 kHz only outputs from the Front Speakers.

No sound from the Center Speaker.

Cause	1 You turned off the Center Speaker volume
	level.

Solution Turn up the Center Speaker volume. See page 61.

Cause2 You set “* CENTER” in the SET MENU to “NON”.

Solution	Set the Center Speaker correctly. See page
	64.

Cause3 You have selected a DSP Program from the Music group (excluding 5ch Stereo).

Solution	Select another DSP Program. See pages 16
	and 17.

Cause4 Dolby Digital and DTS sources do not contain a center channel signal.

No sound from the Surround Speakers.

Cause1 You turned off the Surround Speaker volume level.

Solution Turn up the Surround Speaker volume. See page 61.

Cause2 CinemaStation plays a monaural source in the Theater DSP Program.

Solution Select another DSP Program. See pages 16 and 17.

No sound from the Subwoofer.

Cause1 You set “* BASS” in the SET MENU to “FRONT” when CinemaStation plays a

Dolby Digital or DTS source.

Solution	Set “* BASS” to “SWFR” or “BOTH”. See
	page 64.

Cause2 You set “* BASS” in the SET MENU to “FRONT” or “SWFR” when CinemaStation

plays a 2-channel source.

Solution Set “* BASS” to “BOTH”. See page 64.

Cause 3	The source doesn’t contain an LFE or other
	low tone signal (below 90 Hz).
No low tones.
Cause	The Speaker mode you selected in the SET
	MENU does not match your speaker.
Solution	Set the appropriate Speaker mode based on
	the size of the speakers you are using. See
	page 63.
Strange humming noises.
Cause	You did not connect the pin cable properly.

Solution Check your pin cable connections.

98