Sound volume will not increase.

Cause

The power of the device connected to

CinemaStation’s output jack is not turned

 

 

on.

Solution If the power of the device connected to the output jack is not turned on, playback may

be distorted and volume low. Turn on the power of the connected device.

Sound field effect cannot be recorded.

Cause

It is not possible to record audio enhanced

by a sound field effect.

 

Audio recording will not work.

Cause1 You are trying to make a digital recording with an analog source.

Solution Try inputting a digital source.

Cause2 CinemaStation and the recording device are not connected digitally.

Solution Connect them digitally.

Cause3 You are trying to make an analog recording with a digital source.

Solution Try inputting an analog source.

Cause4 CinemaStation, the playback device and the recording device do not share an analog connection.

Solution Connect them with an analog connection.

Cause5 Some recording devices are not able to record a digital source such as Dolby Digital

or DTS.

Appendix

Digital and high frequency devices create noise.

Cause

CinemaStation is placed too close to a

digital or high frequency device.

 

Solution

Place CinemaStation further away from

such devices.

 

SET MENU setting content has disappeared.

Cause

The power cord has not been connected to

the outlet for over a week or the time set for

 

 

the external timer has past, which turned off

 

the power, more than a week ago.

Solution Set the SET MENU again.

Appendix

CinemaStation is not working normally.

The internal microcomputer froze up due to

Cause electric shock (lightening bolt or excessive static electricity) or drop in power supply.

Solution

Pull out the AC plug from the outlet and

after about 30 seconds plug it in again.

 

English

99