Yamaha DVX-S200, DVR-S200 Notes on recording and playing audio

Using Other Equipment

Notes on recording and playing audio

•Perform a test recording before recording.

•It is not possible to record DSP effects.

•CinemaStation cannot output a Super Audio CD signal to the OPTICAL OUT jack. To record a Super Audio CD signal, connect external devices (such as CD or MD recorder) to the analog output jacks and use it to record the signal.

•When you turn off the connected CD recorder or MD recorder power, playback sound may become distorted and the volume reduced. In this case, turn on the CD recorder or MD recorder power.

•Even if you adjust the audio volume, audio quality, or change the DSP Program during a video recording, it has no effect on the recorded sound. However, in DVD/CD mode, the output sound for recording may cut off if any of the operations below are performed. Do not perform any of the below during recording.

—Output a test tone.

—Change a DSP Program

—Connect/disconnect the headphones

•CinemaStation can output a signal from the DIGITAL IN jack to the DIGITAL OUT jack. The signal input from the DIGITAL IN jack cannot output from the analog output jacks, and the signal input from the analog input jacks cannot output from the DIGITAL OUT jacks.

•Do not use audio recordings that you make for any purpose other than private enjoyment without the consent of the

copyright holder.

Timer Playback/Recording

Combined with a commercially available audio timer, you can perform Timer Playback and Timer Recordings.

Operations vary depending on the equipment and audio timer used, so be sure to read the relevant equipment owner’s manual.

52