Creating the Best Listening Space

Placing the Front and Surround Speakers

You can place the Front Speakers and Surround Speakers on the floor or a rack, or attach them to a wall. You can also mount them on commercially available speaker stands.

When placing on the floor or a rack

As shown in the picture, attach the non-skid pads on the bottoms of the Front and Surround Speakers in the four corners. This stabilizes the speakers to prevent sliding.

* Place on a stable, flat surface.

Non-skid pad

When attaching to a wall

Creating

Screws (3.5 to 4 mm dia., commercially available)

110 mm

110 mm

10 mm

20 mm or more

Attach to the wall using the two holes on the back of the Front and Surround Speakers.

Attach 2 screws (3.5 to 4 mm dia., commercially available) to each place you want to hang a Front or Surround Speaker.

Hang the speakers on the screws using the holes in the back of each speaker.

Note

•Make sure that the tapping screw enters the narrow part of the hole and the speaker is fixed securely in place.

Best the Space Listening

Notes

•One speaker weighs about 1.0 kg (2.2 lb). Make sure you fasten screws only into a solid wall or pillar. Do not attach to a wall that is made of plaster, decorative veneer sheeting or other material that peels easily. If the screws come off and a speaker falls, somebody may get injured.

•Do not attach the speakers using nails or two-sided tape. Vibration during use may cause the nails to loosen, tape to peel off and speakers to fall, resulting in injury.

•CinemaStation may fall over if your feet or hands get caught in the speaker cable. Make sure the cables are fixed in place.

•After attaching everything, check the overall safety of your installation.

YAMAHA will bear no responsibility for accidents caused by improperly placed equipment or faulty installation methods.

English

55