Mounting the front and surround speakers

Mount the speakers on a shelf, rack or directly on the floor, or hang them on the wall.

To mount the speakers on a wall by using the holes on the speakers’ back panels

1. Fasten screws into a firm wall or wall support as shown in the figure.

Diam. 3.5–4 mm

Round head screw (not supplied)

70 mm

 

 

 

 

 

70 mm

 

 

 

 

 

 

 

 

 

 

 

 

Placing the the front/surround speakers

When placing the speakers on a flat surface, attach the included nonskid pads to the corners on the bottom of the speakers. This prevents the speakers from sliding around.

Nonskid pads

Wall/ wall support

10 mm

Min.

20 mm

If you want to mount a speaker on a commercially available speaker stand for the front/surround speakers

2.Hang the speaker by mounting the holes on the protruding screws. * Make sure that the screws are securely caught by the narrow parts

of the holes.

70 mm

WARNING

●Each speaker weighs 0.9 kg (2 lbs.). Do not mount them on thin plywood or a wall composed of a soft surface material. If mounted, the screws may pull out of the flimsy surface and the speakers may fall. This may damage the speakers or cause personal injury.

●Do not affix the speakers to a wall using nails, adhesives, or any other unstable hardware. Long-term use and vibrations may cause the speakers to fall.

●To avoid accidents resulting from tripping over loose speaker cables, fix the cables to the wall.

●Select an appropriate position on the wall to mount the speaker so that no one will injure his/her head or face.

Using the Yamaha Speaker Stand SPS-80 (option)

By using the Yamaha Speaker Stand SPS-80, speakers can be placed on the floor.

SPS-80

* The SPS-80 is not available in some areas.

The provided mounting bracket with 1 pair of screw holes (at an interval of 60 mm) can be used to mount the speaker on a speaker stand.

* Those screw holes can be used with M4 screws only.

60mm

1.Attach the bracket to the bottom of the speaker by using the provided screw so that the convex part of the bracket fits in the grooved part on the bottom of the speaker.

Mounting bracket

Screw

2.Mount the speaker on the speaker stand by using the screw holes on the bracket.

Note:

The mounting bracket is provided for each speaker.

Note:

-Be careful not to let the speaker system fall, it might cause damage or serious injuries.

-If you use another speaker system, please change the settings of “Speaker” under “SETTINGS ON THE SET UP MENU” to the proper settings for the speaker system. (See Page 17.)

E-7