Antenna connections
Outdoor FM antenna | AM loop antenna | AM loop antenna | |
(not supplied) | Set up the loop antenna. | ||
|
2
1
Indoor FM antenna
|
| |
| TUNER | VIDEO 1 |
| 75Ω | VIDEO |
|
| |
| FM |
|
| ANT |
|
| GND |
|
|
| IN OUT |
| AM | L |
75Ω | ANT |
|
| AUDIO | |
|
| R |
FM
ANT
GND
AM
ANT
In areas close to a transmitter the simple indoor antenna is sufficient to receive broadcasts. Extend the antenna wire as straight as possible and, while listening to the sound from the system, secure it in a position which yields minimal distortion and noise.
In fringe areas or where reception is distorted or noisy, an external antenna (not supplied) should be connected instead of the simple indoor antenna. Consult your dealer.
Unwind the antenna wires, then connect them to the AM ANT terminals. Place the loop antenna in a position which yields the best AM reception, or attach it to a wall or other surface.
1
3
2
Screws (not supplied)
Note:
To minimize noise, the speakers, power cable and any other cable should not come close to the indoor or external antenna cable and AM loop antenna . Do not place the antenna cables close to the system.
Connecting to a TV with the video pin cable
Connect the included or commercially available video pin cable between the MONITOR OUT VIDEO jack of the unit and the video input jack of the TV.
TUNER |
| VIDEO 1 | VIDEO 2 |
| IN | OUT | IN |
75Ω | VIDEO |
|
|
|
|
| |
FM |
|
|
|
ANT |
|
|
|
GND |
|
|
|
| IN | OUT | IN |
AM | L |
| L |
ANT |
|
|
|
| AUDIO |
|
|
| R |
| R |
Video pin cable
TV
COMPONENT | VIDEO OUT SELECT | MONITOR OUT |
| ||
VIDEO OUT | VIDEO |
| |||
(DVD ONLY) |
| ||||
| (DVD ONLY) |
|
| ||
Y |
|
|
|
|
|
| COMPONENT |
|
| SPEAKERS | |
|
|
| 8Ω | ||
PB |
|
|
|
| |
|
|
|
| AUDIO | |
| SCAN SELECT |
|
| ||
|
|
| VIDEO | ||
| VIDEO OUT |
|
| INPUT | |
PR | SELECTABLE | INTERLACE |
| ||
| 480p/480i | 480i |
|
| 1 |
480p/480i |
|
|
|
| |
|
|
|
|
| |
(DVD ONLY) | (DVD ONLY) |
| R FRONT L CENTER | SUB | |
|
|
|
| R SURROUND L WOOFER | |
U.C (US.CA)
MADE IN CHINA
Notes on connections
-Please refer to the instruction manuals for the components that you are connecting (TV, etc.).
-When you connect the unit to your TV and other equipment, be sure to turn off the power and disconnect all of the equipments from the AC outlet until all the connections have been made.
-Do not connect the MONITOR OUT (S VIDEO/VIDEO) and COMPONENT VIDEO OUT jacks of the unit to a VCR directly. The playback picture will be distorted because DVD discs are copy protected.
-Please consult your local audio/video dealer for more details.